Operation Manual

Please check www.sitecom.com for up to date drivers & utilities, manuals and support

Filter client PC by MAC Check “Enable MAC Filtering” to enable MAC Filtering.

Add PC Fill in “Client PC MAC Address” and “Comment” of the PC that is

allowed to access the Internet, and then click “Add”. If you find

any typo before adding it and want to retype again, just click

"Reset" and the fields will be cleared.

Remove PC If you want to remove some PC from the "MAC Filtering Table",

select the PC you want to remove in the table and then click

"Delete Selected". If you want to remove all PCs from the table,

just click the "Delete All" button. If you want to clear the

selection and re-select again, just click “Reset”.

Click <Apply> at the bottom of the screen to save the above configurations. You can now

configure other sections by choosing Continue, or choose Apply to apply the settings and

reboot the device.