Operation Manual

Sitecom Wireless Network Broadband Router 300N WL-183
32
7.4 Access Control
This wireless router supports MAC Address Control, which prevents unauthorized clients from
accessing your wireless network.
Parameters Description
Enable wireless access control Enables the wireless access control function
Adding an address into the list Enter the "MAC Address" and "Comment" of the wireless
station to be added and then click "Add". The wireless
station will now be added into the "Current Access
Control List" below. If you are having any difficulties
filling in the fields, just click "Clear" and both "MAC
Address" and "Comment" fields will be cleared.
Remove an address from the list If you want to remove a MAC address from the "Current
Access Control List ", select the MAC address that you
want to remove in the list and then click "Delete
Selected". If you want to remove all the MAC addresses
from the list, just click the "Delete All" button. Click
"Reset" will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations. You can
now configure other sections by choosing Continue, or choose Apply to apply the
settings and reboot the device.