Operation Manual

Please check www.sitecom.com for up to date drivers & utilities, manuals and support
25
transmission rate to transmit the data packets.
Preamble Type The “Long Preamble” can provide better wireless LAN compatibility
while the “Short Preamble” can provide better wireless LAN
performance.
Broadcast ESSID If you enabled “Broadcast ESSID”, every wireless station located
within the coverage of this access point can discover this access point
easily. If you are building a public wireless network, enabling this
feature is recommended. Disabling “Broadcast ESSID” can provide
better security.
IAPP If you enable “IAPP”, the router will allow roaming between IAPP
enabled access points within the same wireless LAN.
802.11g Protection This is also called CTS Protection. It is recommended to enable the
protection mechanism. This mechanism can decrease the rate of
data collision between 802.11b and 802.11g wireless stations. When
the protection mode is enabled, the throughput of the AP will be a
little lower due to a lot of frame-network that is transmitted.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other sections by choosing Continue, or choose Apply to apply the settings and
reboot the device.