Operation Manual

23
Basic Settings
Band Allows you to set the AP fixed at 802.11b or 802.11g mode. You can also
select B+G mode to allow 802.11b and 802.11g clients at the same time.
ESSID This is the name of the wireless signal which is broadcasted. All the
devices in the same wireless LAN should have the same ESSID.
Channel The channel used by the wireless LAN. All devices in the same
wireless LAN should use the same channel.
Channel Bandwidth Allows you to choose the channel bandwidth 20 MHz or
20/40 MHz.
Extension Channel Allows you to select the extension channel when Channel
bandwidth is set to 20/40 MHz.