Operation Manual

the upgrade process. (You may have to wait a few minutes for the upgrade to complete). Once
the upgrade is complete you can start using the router.
9.4 Back-up Settings
The Backup screen allows you to save (Backup) the router’s current configuration setting.
Saving the configuration settings provides an added protection and convenience should
problems occur with the router and you have to reset to factory default. When you save the
configuration setting (Backup) you can re-load the saved configuration into the router through
the Restore selection. If extreme problems occur you can use the Restore to Factory
Defaults selection, this will set all configurations to its original default settings (e.g. when you
first purchased the router).
Parameters Description
Configuration Tools Use the "Backup" tool to save the Broadband router current
configuration to a file named "config.bin" on your PC. You can then use
the "Restore" tool to restore the saved configuration to the
Broadband router. Alternatively, you can use the "Restore to
Factory Defaults" tool to force the Broadband router to perform a
power reset and restore the original factory settings.
50