Operation Manual

9.2 Remote Management
The remote management function allows you to designate a host in the Internet the ability to
configure the Broadband router from a remote site. Enter the designated host IP Address in
the Host IP Address field.
Parameters Description
Host Address This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from a remote
site. This means if you are at home and your home IP address has been
designated the Remote Management host IP address for this router (located
in your company office), then you are able to configure this router from your
home. If the Host Address is left 0.0.0.0 this means anyone can access the
router’s web-based configuration from a remote location, providing they
know the password.
Click the Enabled box to enable the Remote Management function.
Note: When you want to access the web-based management from a remote site, you must
enter the router’s WAN IP address (e.g. 10.0.0.1) into your web-browser followed by port
number 8080, e.g. 10.0.0.1:8080 (see below). You’ll also need to know the password set in
the Password Setting screen in order to access the router’s web-based management.
48