Operation Manual

Parameters Default Description
UPnP Feature Disable You can Enable or Disable UPnP feature here. After you
enable the UPnP feature, all client systems that support
UPnP, like Windows XP, can discover this router
automatically and access the Internet through this
router without any configuration. The NAT Traversal
function provided by UPnP can let applications that
support UPnP smoothly connect to Internet sites
without any incompatibility problem due to the NAPT
port translation.
8.6 QoS
The QoS can let you classify Internet application traffic by source/destination IP address and
port number. You can assign priority for each type of application and reserve bandwidth for
it. The packets of applications with higher priority will always go first. Lower priority
applications will get bandwidth after higher priority applications get enough bandwidth. This
can let you have a better experience in using critical real time services like Internet phone,
video conference …etc. All the applications not specified by you are classified as rule name
“Others”. The rule with a smaller priority number has a higher priority; the rule with a larger
priority number has a lower priority. You can adjust the priority of the rules by moving them
up or down.
Note: If the total assigned bandwidth of higher priority applications is larger than
the maximum bandwidth provided by the WAN port, the other applications will not
get any bandwidth.
43