Operation Manual

Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
7.3 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g.
Internet websites, email, FTP etc.), then this is the place to set that configuration. Access
Control allows users to define the traffic type permitted in your LAN. You can control which PC
client can have access to these services.
Parameters Description
Deny If you select “Deny” then all PCs will be allowed to access
Internet accept for the PCs in the list below.
Allow If you select “Allow” then all PCs will be denied to access Internet
accept for the PCs in the list below.
Filter client PCs by IP Fill in “IP Filtering Table” to filter PC clients by IP.
Add PC You can click Add PC to add an access control rule for users by
IP addresses.
Remove PC If you want to remove some PC from the "IP Filtering Table",
select the PC you want to remove in the table and then click
"Delete Selected". If you want remove all PCs from the table, just
click "Delete All" button.
Filter client PC by MAC Check “Enable MAC Filtering” to enable MAC Filtering.
34