Operation Manual

6.4 Access Control
This wireless router provides MAC Address Control, which prevents the unauthorized MAC
Addresses from accessing your wireless network.
Parameters Description
Enable wireless access control Enable wireless access control
Add MAC address into the list Fill in the "MAC Address" and "Comment" of the wireless
station to be added and then click "Add". Then this
wireless station will be added into the "Current Access
Control List" below. If you find any issues before adding
it and want to retype again. Just click "Clear" and both
"MAC Address" and "Comment" fields will be cleared.
Remove MAC address from the list If you want to remove some MAC address from the
"Current Access Control List ", select the MAC addresses
you want to remove in the list and then click "Delete
Selected". If you want remove all MAC addresses from
the table, just click "Delete All" button. Click "Reset" will
clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
31