Operation Manual

Parameters Description
Key Length You can select the WEP key length for encryption, 64-bit or 128-bit. Larger
WEP key length will provide higher level of security, but the throughput will
be lower.
Key Format You may select to select ASCII Characters (alphanumeric format) or
Hexadecimal Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key.
For example: ASCII Characters: guest
Hexadecimal Digits: 12345abcde
Default Key Select one of the four keys to encrypt your data. Only the key you select it
in the "Default key" will take effect.
Key1 - Key4 The WEP keys are used to encrypt data transmitted in the wireless network.
Fill the text box by following the rules below.
64-bit WEP: input 10-digit Hex values (in the "A-F", "a-f" and "0-9"
range) or 5-digit ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9"
range) or 13-digit ASCII characters as the encryption keys.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
27