Operation Manual

82
E Xplug Control Installation
Installation To Web Server
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select
“System” and under the “Loading ActiveX From”
input web server location
(http://www.web server location.com/).
Once the settings are completed, the user now is able to
access the Internet Camera from the web browser by
selecting the image view – ActiveX mode.
Installation on Local PC
Insert the CD-ROM into the CD-ROM drive to initiate the
auto-run program. Once completed, a menu screen will
appear as below:
Important Information
It is highly recommended to install the Xplug
Control application to the Web Server for IE 5.0. It
must be installed to a Public Domain with Fixed IP
address.