Operation Manual

10
restricted to defined the user who has a "User Name" and
"User Password" that is assigned by the Administrator.
Administrator can release a public user name and
password so when remote users access the Internet
Camera they will have the right to view the image
transmitted by the Internet Camera.
Note:
Since the default settings are Null String, it is highly
recommended to set the "Admin ID" and "Admin
Password" when you are the first time to use the Internet
Camera. Once the ID and Password are defined, only the
administrator has the access to management the
Internet Camera. This procedure should be done as soon
as possible since the security features with the Internet
Camera will not be enabled until the "Admin ID" and
"Admin Password" is defined.
7. Software Installation
This section describes the Software installation procedure
of the Internet Camera for Web Configuration and IPView
application.
7.1 Web Configuration
The Internet Camera must be configured through its
built-in Web-based Configuration.
Extensive knowledge of local area networks will be
helpful in setting up the Internet Camera.