Operation Manual

WL-308 Gaming Router Full Manual
38
PPTP (Point-to-Point Tunneling Protocol)
The WAN interface can be configured as PPTP. PPTP (Point to Point Tunneling
Protocol) uses a virtual private network to connect to your ISP. This method of
connection is primarily used in Europe. This method of connection requires you to
enter a username and password (provided by your ISP) to gain access to the
Internet. The supported authentication protocols are PAP and CHAP.
Select the PPTP from the My Internet Connection drop-down list.
 Address Mode: PPTP can be used with a dynamic or static IP address. If you
select the Dynamic IP radio button, then the IIP address in the next field is
not required. However, if you select the Static IP radio button, then the IP
address in the next field is required.
 PPTP Address: Specify the IP address
 PPTP Subnet Mask: Specify the subnet mask for the IP address.