Operation Manual

Warning: If there are is any additional firewall software installed, such
as McAfee,
Norton, Panda e.g. you may be required to unblock the Sit
ecom
installer in this software.
Please refer to the documentation of your firewall software.
3. You may be required to unblock the installer in the windows firewall. Windows
will automatically request this action, select Unblock to allow the Sitecom Installer
to scan your network for the ‘Home storage center’.
4. After the detection is finished the installer will show the detected hard drives.
Click Next to continue the installation.
If any of the inserted Hard drives is not detected:
Unplug the power receptacle and check the connection of the hard drive.