Operation Manual

Chapter 2: Connecting the network drive
The network drive can be connected to your PC via 2 options. With USB cable
or by network cable. You can use only 1 of the connections at the same time.
2.1: Connecting the network drive via the included USB cable
If you connect the drive case using USB, the drivers will automatically be
installed by Windows ME/2000/XP, Mac OS X, and Linux. The Network Drive
can then be used as removable hard disk, and no additional configuration is
needed.
2.2: Connecting the network drive via the included network cable
The network drive case can be connected with the network cable to your PC, or
directly to your router.
● Connect the power adapter to the power connector on the Network
Drive.
● Connect a network cable from the network drive case, to a free network
port on your router (or connect it to the network card in your PC).