Operation Manual

MD-020 Card Reader

3. Using the SIM Editor Software

Reading a SIM card

1. Connect the SIM Card Reader to a free USB port on your computer.

Insert your SIM card into the reader with the gold contacts facing down.

Launch the SIM Editor. Go to Start > Programs > Sitecom MD-020 SIM Editor >

Sitecom SIM Editor.

4. Click the “Load/Refresh” button to read the information on the SIM card.

5. If your SIM card is locked with a PIN code, enter your PIN to continue.

6. The Sitecom SIM Editor software will now read your SIM card and display the

phone-numbers. Click the SMS Messages button on the upper left corner of the

screen to view the SMS messages on your SIM card.