Operation Manual

• Select the desired Camera from the list on the left. The current settings for the
selected Camera will be displayed in the table on the right.
• Click Next to continue.
• You will be prompted to enter the Administrator Name and Administrator
• Password, as shown below.
• If using the default values, enter admin for both the name and password.
(Otherwise, enter the Administrator Name and Administrator Password set on the
Maintenance screen.)
• On the following IP Address Settings screen, shown below, choose Fixed IP
Address or Dynamic IP Address.
• Fixed IP Address is recommended, and can always be used.
• Dynamic IP Address can only be used if your LAN has a DCHP Server.
• Click Next to continue.
• If you chose Fixed IP Address,
o Enter an unused IP Address from within the address range used on your
LAN.
o The Subnet Mask and Default Gateway fields must match the values
used by PCs on your LAN.
o The Primary DNS address is required in order to use the E-mail alert or
Dynamic DNS features. Enter the DNS (Domain Name Server) address
recommended by your ISP.
o The Secondary DNS is optional. If provided, it will be used if the Primary
DNS is unavailable.
• Click Next to continue.