Operation Manual

Interfaces - LAN
The LAN tab gives you the opportunity to change the IP settings of the router.
Click Save & Apply at the bottom of this screen to save any changes.
• IPv4 address 192.168.0.1: It is the router’s LAN IP address (Your LAN clients default
gateway IP address).
• IPv4 netmask 255.255.255.0: Specify a Subnet Mask for your LAN segment.
• DHCP Server: Enabled by default. You can enable or disable the DHCP server. When
DHCP is disabled no ip-addresses are assigned to clients and you have to use static
ip-addresses. When DHCP server is enabled your computers will be assigned an ip-
address automatically until the lease time expires.
• IP Address Pool: You can select a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients. The default IP range is 192.168.0.100 ~
192.168.0.200. If you want your PC(s) to have a static/fixed IP address, then you’ll
have to choose an IP address outside this IP address Pool
• Lease Time: Half day. In the Lease Time setting you can specify the time period that
the DHCP lends an IP address to your LAN clients. The DHCP will change your LAN
client’s IP address when this time threshold period is reached.
• Domain Name: You can specify a Domain Name for your LAN or just keep the default
(sitecom.router).