Operation Manual

22
9.4 LAN Settings
The LAN Settings allow you to specify a private IP address for your router’s LAN
ports as well as a subnet mask for your LAN segment. You also can enable the DHCP
server to let the router manage private IP addresses for you automatically.
Parameters Default Description
IP address 192.168.0.1 This is the router’s LAN port IP address
(Your LAN clients default gateway IP
address).
Subnet Mask 255.255.255.0 The Subnet Mask for your LAN segment is
fixed as 255.255.255.0
DHCP Server Enabled You can enable or disable the
DHCP server. By enabling the DHCP server
the router will automatically give your LAN
clients an IP address. If the DHCP is not
enabled then you’ll have to manually set
your LAN client’s IP addresses; make sure
the LAN Client is in the same subnet as
this broadband router if you want the
router to be your LAN client’s default
gateway.