Operation Manual

2.1.2. Rear Panel
Port Description
5VDC Power inlet: DC 5V, 1.5A (minimum)
WAN the port where you will connect your cable (or DSL)
modem or Ethernet router.
Port 1-4 the ports where you will connect networked computers
and other devices.
PRINTER Printer Port
2.2 Procedure for Hardware Installation
1. Decide where to place your Broadband Router
You can place your Broadband Router on a desk or other flat surface, or
you can mount it on a wall. For optimal performance, place your Broad-
band Router in the center of your office (or your home) in a location that
is away from any potential source of interference, such as a metal wall
or microwave oven. This location must be close to power and network
connection.
2. Setup LAN connection
Wired LAN connection: connects an Ethernet cable from your computer’s
Ethernet port to one of the LAN ports of this product.
Figure 2-3 Setup of LAN and WAN connections for this product.
3. Setup WAN connection
Prepare an Ethernet cable for connecting this product to your cable/xDSL
modem or Ethernet backbone. Figure 2-3 illustrates the WAN connec-
tion.
4. Connecting this product with your printer (optional)