Operation Manual

Appendix B – Troubleshooting
Reset to factory Default
There are 2 methods to reset to default.
• Restore with RESET button
First, turn off the router and press the RESET button in. And
then, power on the router and hold the RESET button down until
the M1 and or M2 LED (or Status LED) start flashing, then move
away the hand. If LED flashes about 8 times, the RESTORE proc-
ess is completed. However, if LED flashes 2 times, repeat.
• Restore directly when the router power on
First, hold the RESET button about 5 seconds(M1 will start flash-
ing about 5 times),move away the hand. The RESTORE process
is completed.