Operation Manual

This page support two methods to export system logs to specific desti-
nation by means of syslog(UDP) and SMTP(TCP). The items you have to
setup including:
IP Address for Syslog
Host IP of destination where syslogs will be sent to.
Check Enable to enable this function.
IP addres of Outgoing mailserver
Input the SMTP server IP and port, which are concated with ':'. If you do
not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
Log or Alart recipient
The recipients who will receive these logs. You can assign more than 1
recipient, using ';' or ',' to separate these email addresses.
4.6.6 DDNS (Dynamic DNS)
To host your server on a changing IP address, you have to use dynamic
domain name service (DDNS).