Operation Manual

DC-202 xDSL/Cable Broadband router
9
Top LEDs
WAN LAN Power Status (Red)
On - Connection to
the modem attached
to the WAN (Internet)
port is established.
Flashing - Data is
being transmitted or
received via the WAN
port.
For each port, there are 2 LEDs
Link/Act
On - Corresponding LAN (hub)
port is active.
Off - No active connection on the
corresponding LAN (hub) port.
Flashing - Data is being trans-
mitted or received via the
corresponding LAN (hub) port.
100
On - Corresponding LAN (hub)
port is using 100BaseT.
Off - Corresponding LAN (hub)
port connection is using
10BaseT, or no active connec-
tion.
On - Power on.
Off - No Power.
On - Error
condition.
Off - Normal
operation.
Blinking - This
LED blinks
during start up.