Operation Manual

DC-202 xDSL/Cable Broadband router

Data - Routing Screen

RIP

Enable RIP

Check this to enable the RIP (Routing Information Protocol) feature

of the DC-202.

The DC-202 supports RIP 1 only.

Static Routing

Table Entries

This list shows all entries in the Routing Table.

• The "Properties" area shows details of the selected item in the

list.

• Change any the properties as required, then click the "Update"

button to save the changes to the selected entry.

Properties

• Destination Network - The network address of the remote

LAN segment. For standard class "C" LANs, the network address

is the first 3 fields of the Destination IP Address. The 4th (last)

field can be left at 0.

• Network Mask - The Network Mask for the remote LAN seg-

ment. For class "C" networks, the default mask is 255.255.255.0

• Gateway IP Address - The IP Address of the Gateway or

Router which the DC-202 must use to communicate with the

destination above. (NOT the router attached to the remote seg-

ment.)

• Metric - The number of "hops" (routers) to pass through to

reach the remote LAN segment. The shortest path will be used.

The default value is 1.