Operation Manual

DC-202 xDSL/Cable Broadband router

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Serv-

ers. They must use the Internet IP Address (the IP Address allocated to

you by your ISP).

e.g.

http://203.70.212.52

ftp://203.70.212.52

It is more convenient if you are using a Fixed IP Address from your ISP,

rather than Dynamic. However, you can use the Dynamic DNS feature,

described in the following section, to allow users to connect to your Virtual

Servers using a URL, rather than an IP Address.