Operation Manual

DC-202 xDSL/Cable Broadband router

This screen lists a number of pre-defined Servers, and allows you to define

your own Servers. Details of the selected Server are shown in the "Proper-

ties" area.

Data - Virtual Servers Screen

Servers

This lists a number of pre-defined Servers, plus any Servers you

have defined. Details of the selected Server are shown in the

"Properties" area.

Properties

Enable

Use this to Enable or Disable support for this Server, as required.

• If Enabled, any incoming connections will be forwarded to the

selected PC.

• If Disabled, any incoming connection attempts will be blocked.

PC (Server)

Select the PC for this Server. The PC must be running the appro-

priate Server software.

Protocol

Select the protocol (TCP or UDP) used by the Server.

Internal (LAN)

Ports

Enter the port number which the Server software is configured to

use.

External

(WAN) Ports

The port number used by Internet users when connecting to the

Server. This is normally the same as the Internal Port Number. If it

is different, this device will perform a "mapping" or "translation"

function, allowing the server to use one port address, while clients

use a different port address.