Operation Manual

DC-202 xDSL/Cable Broadband router
51
Start Enter the start using a 24 hr clock.
Finish Enter the finish time using a 24 hr clock.
Services Screen
This screen is displayed when the Edit Service List button on the Access
Control screen is clicked.
Data - Services Screen
Available Services
Available
Services
This lists all the available services.
"Delete" but-
ton
Use this to delete any Service you have added. Pre-defined Services
can not be deleted.
Add New Service
Name
Enter a descriptive name to identify this service.
Type
Select the protocol (TCP, UDP, ICMP) used to the remote system or
service.
Start Port
For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a single port num-
ber, enter it in both the "Start" and "Finish" fields.
Finish Port
For TCP and UDP Services, enter the end of the range of port num-
bers used by the service. If the service uses a single port number,
enter it in both the "Start" and "Finish" fields.
ICMP Type
For ICMP Services, enter the type number of the required service.