Operation Manual

DC-202 xDSL/Cable Broadband router
49
Block by
Schedule
If Internet access is being blocked, you can choose to apply the
blocking only during scheduled times. (If access is not blocked, no
Scheduling is possible, and this setting has no effect.)
Define Sched-
ule Button
Clicking this will open a sub-window where you can define or
modify the Schedule.
Services
This lists all defined Services. Select the Services you wish to
block. To select multiple services, hold the CTRL key while select-
ing. (On the Macintosh, hold the SHIFT key rather than CTRL.)
Edit Service
List Button
If you wish to define additional Services, or manage the Service
list, click this button to open the "Services" screen.
Buttons
Members
Click this button to add or remove members from the current
Group.
If the current group is "Default", then members can not be added
or deleted. This group contains PCs not allocated to any other
group.
See the following section for details of the Group Members screen.
Define Sched-
ule
Click this to open a sub-window where you can define or modify
the Schedule.
Edit Service
List
If you wish to define additional Services, or manage the Service
list, click this button to open the "Services" screen.
Save
Save the data on screen.
Cancel
Reverse any changes made since the last "Save".
View Log
Click this to open a sub-window where you can view the "Access
Control" log. This log shows attempted Internet accesses which
have been blocked by the Access Control feature.
Clear Log
Click this to clear and restart the "Access Control" log, making new
entries easier to read.
Refresh
Update the data on screen.
Group Members Screen
This screen is displayed when the Members button on the Access Control
screen is clicked.
Use this screen to add or remove members (PCs) from the current group.