Operation Manual

DC-202 xDSL/Cable Broadband router

Data - Access Control Screen

Group

Select the desired Group. The screen will update to display the

settings for the selected Group. Groups are named "Default",

"Group 1", "Group 2", "Group 3" and "Group 4", and cannot be re-

named.

"Members"

Button

Click this button to add or remove members from the current

Group.

• If the current group is "Default", then members can not be

added or deleted. This group contains PCs not allocated to any

other group.

• To remove PCs from the Default Group, assign them to an-

other Group.

• To assign PCs to the Default Group, delete them from the

Group they are currently in.

See the following section for details of the Group Members screen.

Internet Access

Restrictions

Select the desired options for the current group:

• None - Nothing is blocked. Use this to create the least restric-

tive group.

• Block all Internet access - All traffic via the WAN port is

blocked. Use this to create the most restrictive group.

• Block selected Services - You can select which Services are

to block. Use this to gain fine control over the Internet access

for a group.