Operation Manual

DC-202 xDSL/Cable Broadband router
39
Connection Log Messages
Message Description
Connect on Demand Connection attempt has been triggered by the
"Connect automatically, as required" setting.
Manual connection Connection attempt started by the "Connect"
button.
Reset physical con-
nection
Preparing line for connection attempt.
Connecting to remote
server
Attempting to connect to the ISP's server.
Remote Server lo-
cated
ISP's Server has responded to connection at-
tempt.
Start PPP Attempting to login to ISP's Server and establish
a PPP connection.
PPP up successfully Able to login to ISP's Server and establish a PPP
connection.
Idle time-out reached The connection has been idle for the time period
specified in the "Idle Time-out" field. The connec-
tion will now be terminated.
Disconnecting The current connection is being terminated, due
to either the "Idle Time-out" above, or "Discon-
nect" button being clicked.
Error: Remote Server
not found
ISP's Server did not respond. This could be a
Server problem, or a problem with the link to the
Server.
Error: PPP Connec-
tion failed
Unable to establish a PPP connection with the
ISP's Server. This could be a login problem
(name or password) or a Server problem.
Error: Connection to
Server lost
The existing connection has been lost. This could
be caused by a power failure, a link failure, or
Server failure.
Error: Invalid or
unknown packet type
The data received from the ISP's Server could
not be processed. This could be caused by data
corruption (from a bad link), or the Server using
a protocol which is not supported by this device.