Operation Manual

DC-202 xDSL/Cable Broadband router

Internet access

Windows 98/ME/2000

• In the Taskbar, click on the Start button and select Settings - Control

Panel - Internet options.

• Select the tab page Connections and click on the button Settings.

• Select "I want to configure my Internet connection manually" or "I

want to make a connection via a LAN network" and click on "Next >".

• Select "I want to connect via a LAN network" and click on "Next >".

• Check carefully that all of the checkboxes in the screen Internet con-

figuration for a LAN have not been checked.

• Continue with the steps in the wizard, until the task is completed.

• The configuration is now completed.

Windows XP

• In the Taskbar, click on the Start button and select - Settings –

Control Panel - Internet options.

• Select the tab Connections and click the Setup… button.

• When the New Connection Wizard starts, click on Next.

• Select Connect to internet and click on Next.

• Select Set up my connection manually and click on Next.

• Select Connect using a broadband connection that is always on and

click on Next.

• Click on Finish to close the Wizard.

• In the Taskbar, click on the Start button and select - Settings –

Control Panel - Internet options.

• Select the Connections tab and click on the LAN Settings button.

• Check carefully that none

of the boxes in the Local Area Network

(LAN) Settings window are checked.

• The configuration is now completed.

Accessing AOL

To access AOL (America On Line) through the DC-202, the AOL for Win-

dows software must be configured to use TCP/IP network access, rather

than a dial-up connection. The configuration process is as follows:

• Start the AOL for Windows communication software. Ensure that it is

Version 2.5, 3.0 or later. This procedure will not work with earlier ver-

sions.

• Click the Setup button.

• Select Create Location, and change the location name from "New Local-

ity" to "DC-202".

• Click Edit Location. Select TCP/IP for the Network field. (Leave the

Phone Number blank.)

• Click Save, then OK.

Configuration is now complete.

• Before clicking "Sign On", always ensure that you are using the "DC-

202" location.