Operation Manual

Sitecom ADSL2+ Modem DC-227
56
9.4 Backup Settings
The Backup screen allows you to save (Backup) the modem’s current configuration settings.
When you save the configuration setting (Backup) you can re-load the saved configuration
into the modem through the Restore selection. If extreme problems occur you can use the
Restore to Factory Defaults selection, this will set all configurations to its original default
settings (e.g. when you first purchased the modem).
Use the "Backup" tool to save the Broadband modem current configuration to a file named
"config.bin" on your PC. You can then use the "Restore" tool to restore the saved
configuration to the Broadband modem. Alternatively, you can use the "Restore to Factory
Defaults" tool to force the Broadband modem to perform a power reset and restore the
original factory settings.