Troubleshooting Guide

Environmental Safety
Dispose appropriately of all waste.
This product has been made from high-quality materials and parts which can be re-used
and recycled. Follow local laws and regulations regarding recycling if the unit or parts are
accepted by an authorized recycling company.
Help protect the environment by recycling used products.
EU Regulatory Notice
The product complies with the following EU directives:
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility Directive
Maintenance and Inspection
‐ Regular checkups and preventive maintenance will ensure a more reliable and safe
operation. An initial inspection of the pump within 3 to 4 months after installation is
recommended. Subsequent inspections/maintenance can be carried out every 6 months.
‐ Always disconnect the pump from the power supply before inspecting the pump.
‐ Make sure that the pump cannot roll or fall over to injure people and damage property.
‐ Rinse the pump thoroughly with clean water before working on the pump.
‐ The pump should not be activated if it is partially dismantled.
‐ Worn impellers often have very sharp edges. Be very careful when replacing them!