Troubleshooting Guide

Instruction Manual
︱
4
‐ Check the nameplate for output and voltage required for the pump.
• It is important that you check whether the pump is to be used with 50Hz or 60Hz.
• Serious damage may occur if it is connected to an improper voltage.
‐ Make sure if the voltage of the power supply is identical to the one indicated on the
nameplate (label) of the pump.
‐ Do not plug in to other voltage and phase than what is indicated on the nameplate.
‐ In case of doubt please contact your supplier.
Before Installation
Product Nameplate
The nameplate provides important details. Be careful not to exceed the given specifications
in the use of the product.
Name Description
No. Serial Number
Model Pump Model
Frequency Power Frequency (Hz)
Head Maximum Pressure Head (m)
Output Pump Output (kW)
Voltage Operating Voltage (V)
Revolution Rotational Speed
Discharge Outlet Size (mm)
Flow Maximum Capacity
Phase Number of Phase (Ø )
Current Electric Current (A)
Weight Pump Weight (kg)
IP Class of Protection
Insulation Class of Insulation
Depth Maximum Submersion Depth (m)