User Manual
SISTEMATICA S.p.A. Pag. 2/3
Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715
http://www.sistematica.it e-mail: info@sistematica.it
TECHNICAL FEATURES
• Manufacturer: SISTEMATICA S.p.A.
• Dimension (in mm): 180 x 78 x 40
• IP protection: IP67
• Operating temperature: -20°C ÷ +70°C
• Battery supply: lithium polymer batteries (Li-Pol)
single cell 3,7V 1200 mAh
• Quiescent absorption: 20 µA
• Active and passive Safetypoint
• Keyboard (2 possibilities – both with backlight)
- 8 keys
- 4 keys + 4 joy-pad keys
• 3-axis accelerometer for tilting-hand
• Buzzer
• Display 128x128 COG-FSTN blue backlight
•
Working distance: 100÷150 m in free fiel condition
• CRADLE – battery charge
TRANSMITTER LED
The transmitter is equipe with a meduse to indicate the charge status of the system. The following table descrive the
meaning:
LED FUNCTION MEANING
RED ON Transmitter in charge
SYSTEM CODING
Coding the system is an operation that is only necessary when the receiver has to be replaced or you want to use it
with a different SISTEMATICA radio remote control from the one it is coupled with at the time of purchase.
To recode the system, consult the user manual of the receiver coupled with the transmitter.
CRADLE INSTALLATION
The cradle (battery charger interface) has to be installed less to 1 meter far from the vehicle cigarette lighter socket.
Since it is provided with a standard vehicular battery charger with 1m cord.
To power the cralde:
- insert the battery charger in the cigarette lighter socket
- plug the battery charger micro-USB output connector into the cradle micro-USB socket
The cradle can be powered with any standard vehicular battery charger with mirco-USB output connector.
BATTERY MANAGEMENT AND RECHARGE
The remote control is equipped with a single cell Li-Po battery which can be recharged without the need to remove it
from the device.
During the use of the remote control, an icon on the display indicates the status of the battery through four
segments.
The charge process start automatically once the remote control is placed in its cralde, the battery icon, together with
the red led indicate that the charge is in progress.
Once the charge is complete the battery icon indicates the complete full battery status and all the four segments of
the battery icon are lighted.
Figura 1. Palmare in carica