User Manual

SISTEMATICA S.p.A.
SISTEMATICA S.p.A.SISTEMATICA S.p.A.
SISTEMATICA S.p.A. Pag. 4/4
Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. [phone] r.a. – Fax [phone]
http://www.sistematica.it e-mail: [e-mail]
PRODUCT IDENTIFYING LABELS
NIMBLE: product model
S/N: product derial number
Cod.: product identification code
RECEIVER IDENTIFICATION LABEL
POSITIONING ON THE RECEIVER OF THE IDENTIFICATION
LABEL
Removal of the identifying labels entails lapsing of the guarantee conditions and the
responsibility of SISTEMATICA S.p.A. with respect to competent bodies
PROBLEM IDENTIFICATION AND SOLUTION
P ROBLEM P OSSIBLE C AUSES S OLUTIONS
The system does not respond to the
controls
Absence of power in the receiver
unit
-Check that the emergency mushroom button on the
transmitter is in the release position
-Check that the vehicle battery is correctly connected to
the receiver unit
Incorrect connection of the
cabling to the utilities
-Check the cabling to the users (indicators, electro-valves
etc.)
Incorrect installation of the
receiver
-The receiver must not be shielded by ferrous masses
(see “POSITIONING OF THE RECEIVER UNIT”)
System not coded -Re-code the system (see “CODING THE SYSTEM”)
CE MARK
Declaration of conformity for Sistematica S.p.A. products can be required at: [e-mail]
This product may be subjected to usage restriction. Please contact [e-mail] for any further questions.
FCC STATEMENTS
These devices complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) these devices may not cause harmful interference and
(2) these devices must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to
these equipment. Such modifications could void the user’s authority to operate the equipments.
SISTEMATICA S.p.A. Grantee Code: O8I
NIMBLE RTX label example
FCC ID: O8INIMBLE