User Manual

SISTEMATICA S.p.A.
SISTEMATICA S.p.A.SISTEMATICA S.p.A.
SISTEMATICA S.p.A. Pag. 3/4
Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. [phone] r.a. – Fax [phone]
http://www.sistematica.it e-mail: [e-mail]
POSITIONING OF THE RECEIVER UNIT, DIMENSION AND DRILLING TEMPLATE
For a proper functioning, locate the receiver type NIMBLE with the cable output downwards, as shown in the picture
below:
The receiver is provided with an integrated antenna; be sure to locate it at sight, not inside any
metal box or screened by ferrous masses (ex. protection carter…)
For the receiver installation use supplied fixing screaw (or equivalent)
POSI
TIONING OF THE RECEIVER NIBLE
DIMENSION DRILLING TEMPLATE NIMBLE
DIMENSION BOX RECEIVER NIMBLE
FUSE
The system is automatically protected from power overload and from possible short-circuit on corresponding outputs
by an internal resettable fuse (7A).