User manual

4 Installation
Unpack and check carefully there is no transportation damage before using the unit.
Keep the equipment packaging. To fully protect the product against vibration, dust
and moisture during transportation or storage use the original packaging or your
own packaging material suitable for transport or storage, respectively.
Create all connections while the device is o. Use the shortest possible high-quality
cables for all connections. Take care when running the cables to prevent tripping
hazards.
n This equipment uses a frequency range that is free of charge and registration
within the European Union.
For more information, please visit: http://www.thomann.de.
n Make sure that no metal objects are located between transmitter and receiver.
n Avoid interference by other radio and in-ear systems.
The unit has been designed for rack mounting in a standard 19-inch rack; it occupies
one rack unit.
Push the lock of the battery holder towards the centre of the housing and pull out
the battery holder like a drawer. Insert the battery. The battery is correct, if the posi‐
tive pole points to the housing bottom of the remote control. Slide the battery
holder back into the remote until it clicks into place.
Notes on radio transmission
Rack mounting
Insert the battery into the remote
control
Installation
MP2
9