User manual

7.5 Aux-in mode
In Aux-in mode, the device can receive audio data from an external source, e.g. an
MP3 player.
1. Turn the volume on the device and, if possible, on the external audio source to
minimum.
2. Connect the external audio source via the 3.5 mm mini jack socket.
3. Call up the Aux-in mode with [MODE] or via the ‘Aux in’ menu.
4. Adjust the volume as required on the device and, if possible, on the external
audio source.
7.6 Alarms and Sleep
Two independent alarms with snooze function can be set. There is also a sleep func‐
tion to switch o the device after a set period.
7.6.1 Alarms
1. Select ‘Alarms’ to setup or change the alarms.
2. Select the alarm number ( ‘1’ or ‘2’ ) and set the following parameters:
Menu item Options Meaning
‘Enable’ ‘on’ / ‘o’ Enables or disables the alarm
‘Frequency’ ‘Daily’ / ‘Once’ /
‘Weekends’ /
‘Weekdays’
Sets the alarm to repeat (daily, once,
on weekends, on weekdays)
‘Time’ Sets the alarm time
‘Mode’ ‘Buzzer’ / ‘Internet
radio’ / ‘DAB’ / ‘FM’
Sets the alarm tone (beeper, internet
radio, DAB radio, FM radio)
‘Preset’ ‘Last listened’ / ‘1’ …
‘10’
Selects the preset (last heard,
memory locations ‘1’ … ‘10’ )
‘Volume’ ‘0’ … ‘20’ Sets the alarm sound volume
Operating
MP2
27