User manual

When updating via DAB or FM, the ‘Daylight savings’ option has no eect.
The time of the device is updated using the set source as soon as a time signal is
received.
After selecting the ‘No update’
option, the setup wizard will prompt you to enter the
time and date manually.
Date and time are displayed in ‘TT-MM-JJJJ’ and ‘SS:MM AM/PM’ format, with the rst
value ‘TT’ ashing. Adjust each value with [CONTROL SELECT] . When a value has
been set, the next value to be entered ashes.
6.1.3 Network
The device is equipped with all common network protocols and encryption methods,
including Wi-Fi Protected Setup (WPS).
To connect your device to the network, you need a wired router and an Ethernet
cable (RJ45 network) or a WIFI router with the associated network key, if applicable.
1. Under ‘WLAN region/country > Wi-Fi network (SSID)’ , select one of the networks
displayed. The four most recently connected WiFi networks are saved. In the
system settings you can view the list, remove networks or view the network
properties, e.g. to troubleshoot network problems.
2. To connect to a wired network, ensure that the router is connected to the devi‐
ce's RJ45 socket using an Ethernet cable and select ‘Wired’ .
ð
If the network is open (not encrypted), the device will be connected imme‐
diately.
1. Use [CONTROL SELECT] to enter the network key by placing the cursor on the
respective character and pressing the rotary switch.
ð
Each character entered is displayed in the bar above.
2. Use ‘BKSP’ , ‘OK’ and ‘CANCEL’ to delete the selected characters from right to
left.
Manual setting
Network encrypted as standard
Setup
media player
16