User guide

37
press and hold menu to return to the
main display screen.
7 Ensure Onyx is tuned to channel
1, the XM Preview channel. Upon
power up, Onyx should tune to
channel 1 by default, when it’s not
yet activated. If it’s not on channel 1,
refer to “Listening to Satellite Radio”
on page 50 to learn about how to
tune a channel.
8 Turn on your vehicle’s stereo system.
Set it to play from the auxiliary
input source. You should hear XM
channel 1 through your vehicle’s
stereo system. You are now ready to
activate your Onyx.
9 Go back to “Step 2: Install the Dash
or Vent Mount” on page 13 and
finish installing the Dash or Vent
Mount. Then the installation is
complete.
10 The audio level output of Onyx can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to “Set Audio Level” on page 74.
If the signal reception is good, showing at least two bars in the lower
left corner of the display, but there is no XM audio, be sure the vehicle’s
stereo system is set to the auxiliary input source (step 8). Also be sure
that the audio level is set high enough to be heard (step 10). Refer to
“Troubleshooting” on page 84 for additional help.
Signal Indicator
S
ATELLIT
E
TERRESTRIA
L
866-635-2349
siriusxm.com
1 XM Preview
Vehicle Installation