User guide

33
molding and into the rubber weather stripping around the door
opening. Lift the weather stripping from the opening and tuck the
cable inside it, then replace the weather stripping. Run the cable
inside of the weather stripping to the bottom of the door opening.
4 Pull the cable out of the weather stripping at the bottom of the
door opening and route it under the carpet toward the dashboard.
Coil any excess cable in a hidden location, such as under the carpet,
keeping it away from any vehicle pedals or controls. Secure the
excess cable with wire ties.
5 Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock.
6 Continue with “Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 34.
Vehicle Installation