User guide

bottom of the door opening.

3 Pull the cable out of the weather stripping at the bottom of the

door opening and route it under the carpet toward the dashboard.

Coil any excess cable in a hidden location, such as under the carpet,

keeping it away from any vehicle pedals or controls. Secure the

excess cable with wire ties.

4 Bring the end of the cable out at the PowerConnect Vehicle Dock

location. Leave yourself enough cable so you can easily connect it to

the antenna connector of the dock.

5 Continue with “Step 5: Connect the Magnetic Mount Antenna and

PowerConnect Power Adapter” on page 34.

Sport Utility Vehicle (SUV)

1 Feed the antenna cable underneath the rubber weather stripping

of the rear tailgate window/door and route the cable along the rear

hatch. Lift the weather stripping from the opening and tuck the

cable inside it, then replace the weather stripping. Pull the cable out

from weather stripping and

route it into the cabin under

the interior trim. Avoid hinges

or gears that could crimp or

cut the cable.

2 Route the cable through the

SUV’s main cabin area under

the interior trim, towards the

front of the vehicle. Use a

blunt plastic putty knife or

similar blunt tool to lift the

Vehicle Installation