User guide

14
3 The dock mounting plate can be tilted in different directions. Adjust
as necessary for your particular vehicle. When the orientation is
correct, tighten the knob.
4 Before you attach the Dash Mount
to the dash, skip ahead and finish
the remainder of the vehicle
installation so that the cables are
attached to the dock.
5 Once the cables have been
attached to the dock, clean
the surface with the alcohol
preparation pad and let it dry thoroughly.
6 Peel off the adhesive liner. Position, press, and hold the Dash Mount
in place for 30 seconds.
IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum
of 2-4 hours before using the mount. The best adhesion occurs after 24
hours.
TIP! To remove the Dash Mount, carefully lift the adhesive pad with your
fingers or a spoon. Warming the pad with a hair dryer for several minutes
will help soften the adhesive.
Knob Adhesive Foot Dock Mounting Plate
Vehicle Installation