Owner's Manual
87
Tour with Vehicle Kit User Guide
10. If you selected No DHCP, enter the IP Addresses. Note that until all the required IP addresses
have been properly entered, you will be unable to proceed.
a. Enter the Radio IP Address (the IP address that will be assigned to Tour).
b. Tap the box and enter the Network Mask.
c. Tap the box and enter the Gateway Address.
d. Tap the box and enter the DNS Address. If all IP addresses have been entered correctly, the
Go button will become enabled. Tap the Go button.
11. At the Confirm Settings screen, confirm that all the information that you entered is correct. If
not, tap the Reconfigure button. If correct tap the OK button.
System Settings