Owner's Manual

85
Tour with Vehicle Kit User Guide
Connect to a Wi-Fi Network Manually (Manual)
In order to connect manually to a Wi-Fi network, you will need the following information.
Network Parameter Your Network
Wi-Fi Network SSID
Encryption (None, WEP, WPA, WPA2)
Password
DHCP or No DHCP
If No DHCP: Radio IP Address
If No DHCP: Network Mask
If No DHCP: Gateway Address
If No DHCP: DNS Address
Once you have the above information you can manually connect to a Wi-Fi network.
1. Tap the Settings
button.
2. Tap the Manage Settings button on the System Settings panel.
3. Swipe left to the Wi-Fi Connection panel.
4. Tap the Configure button on the Wi-Fi Connection panel. (Make sure Wi-Fi is shown as On,
otherwise tap the On/Off slider to turn it on.)
5. Tap the Manual button on the Connect to a Wi-Fi network screen.