Owner's Manual

84
Tour with Vehicle Kit User Guide
Wi-Fi Connection
To receive all the content that Tour is capable of delivering, Tour needs to be connected to a Wi-Fi
hotspot or Wi-Fi network with Internet access for Internet streaming content. Please note that data
rates may apply for Internet streaming when utilizing a hotspot. You are responsible for any carrier,
data and other related fees or charges that may be incurred from your carrier or service provider.
Wi-Fi Connection manages the Wi-Fi settings and connections. Wi-Fi can be turned on or off, a
connection made with a Wi-Fi network, and previous Wi-Fi connections can be forgotten. Each are
described in the following sections.
Turning Wi-Fi On and Off
If you wish to connect the Tour to a Wi-Fi network, Wi-Fi will need to be on, which is the default
setting. However, if not using Wi-Fi, or you do not want Tour to connect to a previously connected
Wi-Fi network, Wi-Fi can be turned off.
1. To turn Wi-Fi on or off, tap the Settings button.
2. Tap the Manage Settings button on the System Settings panel.
3. Swipe left to the Wi-Fi Connection panel.
4. On the Wi-Fi Connection panel tap the On/Off slider to turn Wi-Fi on or off.
Connecting to a Wi-Fi Network
There are two ways to connect to a Wi-Fi network: Scan or Manual. Most every Wi-Fi connection will
use the Scan method, where Tour scans for Wi-Fi networks and returns a list where a Wi-Fi network
may be selected.
In rare instances a Wi-Fi network may not advertise itself, and therefore cannot be found by scanning
for Wi-Fi networks. Tour allows you to manually enter all the Wi-Fi network information and connect.
You will need all the Wi-Fi network details from the network administrator.
The following two sections provide instructions for both methods of connecting to the Wi-Fi network.
Connect to a Wi-Fi Network Automatically (Scan)
To connect to a Wi-Fi hotspot or Wi-Fi network, refer to “Connecting Tour to the Internet” on page
23 for instructions.