Owner's Manual
69
Tour with Vehicle Kit User Guide
System Settings
System Settings is used to manage and configure the radio settings. Each of the system settings are
described in the following sections.
To enter system settings tap the Settings button and then tap the Manage Settings button on the
System Settings panel.
Device Information
Device Information provides the Radio ID of Tour, and the various software versions Tour is currently
running. The Radio ID is necessary when purchasing a SiriusXM subscription for Tour, and the
software version information may be needed is SiriusXM Listener Care is troubleshooting a problem.
1. To display the device information, tap the Settings
button.
2. Tap the Manage Settings button on the System Settings panel.
3. The device information is displayed in the Device Information panel.
Setup Guide
The Setup Guide is used when initially installing Tour to guide step-by-step through the procedure
of connecting the satellite antenna, connecting Tour to the Internet, connecting the audio, and
subscribing and authorizing for the SiriusXM service.
The setup guide can be run again at any time, for instance, if you move Tour to a different vehicle, or
if you buy a Home Dock for Tour.
1. To begin the Startup Guide, tap the Settings
button.
2. Tap the Manage Settings button on the System Settings panel.
3. Tap the Setup Guide button on the Setup Guide panel.
4. Follow the on-screen instructions to complete the setup process.
Audio
Audio settings manage the audio level setting, Bluetooth audio settings, and FM audio settings. Each
of the Audio settings are described in the following sections.
Audio Level
The audio level of Tour can be adjusted when an audio connection is made between the dock and
a vehicle stereo system, or other audio device. Audio level is used to adjust Tour’s volume level to
match the volume of other audio sources you may use.
Do not use the audio level as a volume control. Use the volume control on your audio device instead.
1. To adjust the audio level, tap the Settings
button.
2. Tap the Manage Settings button on the System Settings panel.