User Manual

scroll to and highlight FM Channels. Press the Select button.

4. Press down

to scroll to and highlight the storage location (FM 1 to

FM 5) you want to set and press the Select button. You can choose

among the following options:

i. If the chosen storage location is empty (denoted by “---“), or if

the storage location contains the FM preset currently being used

(denoted by “current”), then the FM channel tuning screen is

displayed.

ii. If the chosen storage location has

an FM preset that is not currently

being used, and you want to edit it,

Edit Channel is highlighted. Press

the Select button. The FM channel

tuning screen is displayed.

iii. If the chosen storage location has

an FM preset that is not currently

being used, and you want to start

using it, press

to highlight Start

Using and press the Select button.

Skip to step 7.

5 Press left

or right to tune to the

desired FM channel in steps of .2, i.e.,

99.3 to 99.5. Press down

or up to

tune to the desired channel in steps of

1, i.e., 99.3 to 100.3. Press the Select

button to select the FM channel.

6 If you are editing the storage location

that has the “current” FM preset, skip

Conﬁguring Your Onyx Plus