Owner's Manual

37
Option 1: Aux In Cable Installation Instructions
1. Plug one end of the Aux In Cable into the green AUDIO connector on
the dock.
2. Plug the other end into the auxiliary input jack
of your vehicle’s stereo system.
3. If you are using the vent mounting method,
attach the Vent Mount to the vehicle vent.
4. Insert your Onyx Plus into the dock.
5. Power on your Onyx Plus by pressing the
Power button.
6. Be sure the vehicle is outside and the antenna has a
clear view of the sky. Verify that you are receiving
the XM signal. There should be at least two bars on
the lower left corner of the main display screen that
denotes antenna signal strength. You can also press
menu and then press down
to scroll to and
highlight Signal Indicator. Press the Select button.
The Satellite and Terrestrial bars show the strength of the signal being
received. If the signal reception is good, press and hold menu to return
to the main display screen.
2
3
4
5
6
7
8
9
0
b / #
alerts
twx
FM
menu
t-mix
t-scn
1
alerts
FM
menu
ti
AUDIO ANT PWR FM
Vehicle Installation